2.4G Touch Screen Led RGBW Controller View full size

2.4G Touch Screen Led RGBW Controller

Model: RB-6A-RGBW

Spec: DC12-24V,6A/CH,Touch function

More details

Features:
1. Wireless Frequency: 2.4G MHz
2. Supply voltage: DC12V/24V
3. Max. output current: 6A/CH
4. Output:4 channels
5.Connecting mode: common anode
6. Used for RGBW Led strips

Remote:

Size: 110x52x20mm

Power: AAA battery*2 pcs

Material: ABS

Fabrication processing: Multicolor printing & UV varnish

Controller:

Size: 85x45x23mm

Working voltage: DC12V ~ 24V

Control way: R G B W four channels

Max load per channel: 6A

Output connection: Common anode

Telecontrol distance: 20 metres

Programs: 15 kinds

Packing Details:
1pc Remote + 1pc Controller
Packing Size:L120*W120*H28(mm)
G.W.:126g

Application
Programming(Code Matching and Code Clearing )

Code Matching:

For a new kit ( remote& controller), the remote can work only when it is programmed to the controller.

Please follow the below instructions:
Correctly connect the power supply, LED controller and LED load.
Switch off the power, then switch on again, and press key 5 once (within 3 seconds)
the moment you see the light is on.The LED light blinks three times slowly when it is done.

Code Clearing :
The code can be cleared as needed.
The kit (remote and controller) will stay in the original state after code clearing.
It can work when code rematching is done.

Please follow the below instructions:
Also, Correctly connect the power supply, LED controller and LED load.
Switch off the power, then switch on again, and long press key 5(within 3 seconds)
the moment you see the light is on.The LED light blinks six times swiftly when it is done.
nstallation
Connection:
Attentions:
1.Please check whether the input voltage of the constant voltage power supply is in accordance with the controller, and please check the    connection of both the cathode and anode, otherwise the controller will be broken;
2.Please do not connect wires with power on.Please switch on only when it is in right connection and no short circuit;
3.Please keep your figure off the touching ring when installing the batteries, to improve its sensitivity, and use the remote (3 seconds later) after the installation. Please reinstall the batteries, if the touching ring is found low-sensitivity.
4.Please do not use the controller in the place with widely range metal area or strong electromagnetic wave nearby, otherwise, the remote distance will be seriously affected.



Write your review

2.4G Touch Screen Led RGBW Controller

2.4G Touch Screen Led RGBW Controller

Model: RB-6A-RGBW

Spec: DC12-24V,6A/CH,Touch function

Write your review